American Power Conversion-APC 120 Rack PDU - $696.67

American Power Conversion-APC 120 Rack PDU: MODEL- AP7900 VENDOR- AMERICAN POWER CONVERSION FEATURES- Switched Rack PDU- Black finish Rack PDU, Switched, 1U, 15A, 100/120V, (8) 5-15. 19 inch Rack-Mountable, Alarm Thresholds, Flash Upgradeable, Local Current Monitoring Display, Power Delays, Remote Current Monitoring, Remote Individual Outlet Control, Remote Management Capabilities. Power distribution that remotely controls power to individual outlets and monitors the aggregate power consumption. APC s Switched Rack Power Distribution Units (PDUs) are premium solutions to many of the power management problems seen in today s IT environments. Some of the problems are unauthorized use of power outlets, locked-up equipment, in-rush current, overloaded circuits, and the need of remote access to power outlets in the rack. The Switched Rack PDUs address these problems through individual outlet control, power on and off delays, current monitoring, alarm thresholds, and network management. Individual outlet control allows users to turn outlets on, turn outlets off, or recycle power to equipment, which can reboot locked-up equipment and avoid unauthorized use of outlets. Power delays allow users to determine the order in which equipment is powered up or down. Utilizing the power delay feature will avoid in-rush current, which can cause overloads. Monitoring the current draw at the rack level is key to avoiding downtime due to overloaded circuits. The Switched Rack PDUs provide an aggregate current draw, which can be viewed remotely or locally, via digital display. In addition, alarms will be generated based on user-defined thresholds to alert users of potential circuit overloads (NOTE: Currently available on select models only. Includes PDU, Installation guide, Rack mounting brackets and user manual. Manageability - Local Current Monitoring Display: The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only). - Alarm Thresholds: Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. - Remote Management Capabilities: Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. - Remote Individual Outlet Control: Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment). - Power Delays: Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start- up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly. - Flash Upgradeable: Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. Convenience - 19 inch Rack-Mountable: Includes horizontal, vertical, and toolless- mount varieties. Puts power where it is needed most - in the racks near the equipment. - Vertical Mounting Capabilities: Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a NetShelter VX enclosures. - Toolless Mounting Capabilities: Units do not require additional tools to mount into APC s NetShelter VX, which allows the users to quickly and easily mount units in the rear of the enclosure. -- SPECIFICATIONS ------------------------------ OUTPUT - Output Voltage(s) (main only): 120 V Maximum Total Current Draw per Phase: 15 A Output Connections: (8) NEMA 5-15R INPUT - Nominal input voltage: 120 Input frequency (Hz): 50/60 Hz Input Connection Type: NEMA L5-15P Cord Length: 12 feet (3. 66 meters) Maximum Input Current per phase: 15 A Load Capacity: 1800 APPROVALS- cUL Listed, FCC Part 15 Class A, UL Listed, VCCI SIZE - 17. 5 inchw x 1. 73 inchh x 4. 25 inchd WT. - 5. 00 lbs. Www. Apcc. Com